Internal microphone installation guide (without drilling)
Step 1
- Install microphone inside with 3M Dual-locks.
- Add a small piece of 3M Dual-lock on the cable to fix it inside the guitar body.
- Add a small piece of 3M Dual-lock on the endpin to fix it on the guitar body.
![](https://nvtone.com/wp-content/uploads/2019/09/alternative_step_1.jpg)
1
Install microphone inside with 3M Dual-locks.
2
Add a small piece of 3M Dual-lock on the cable to fix it inside the guitar body.
3
Add a small piece of 3M Dual-lock on the endpin to fix it on the guitar body.
Step 2
- Add a small piece of 3M Dual-lock on the guitar body to fix the endpin on the guitar body.
![](https://nvtone.com/wp-content/uploads/2019/09/alternative_step_2.jpg)
Add a small piece of 3M Dual-lock on the guitar body to fix the endpin on the guitar body.
![](https://nvtone.com/wp-content/uploads/2019/09/alternative_step_2.jpg)
Add a small piece of 3M Dual-lock on the guitar body to fix the endpin on the guitar body.
Step 2
- Add a small piece of 3M Dual-lock on the guitar body to fix the endpin on the guitar body.
Step 3
- Align and pull the cable.
- Lock the endpin with 3M Dual-locks.
![](https://nvtone.com/wp-content/uploads/2019/09/alternative_step_3.jpg)
1
Align and pull the cable.
2
Lock the endpin with 3M Dual-locks.
Final result
![](https://nvtone.com/wp-content/uploads/2019/09/alternative_step_4.jpg)